[PATCH v3 13/18] arm64: dts: allwinner: a64: bananapi-m64: Enable HDMI output
From: jagan@amarulasolutions.com (Jagan Teki)
Date: 2018-07-18 10:56:49
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
Enable all necessary HDMI pipeline nodes with HDMI out connector on Bananpi-m64 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - Enable all pipeline components Changes for v2: - none .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..7adba2c8f6e5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts@@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds";
@@ -86,6 +97,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; };
@@ -103,6 +118,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>;
@@ -120,6 +146,10 @@ }; }; +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;
@@ -300,6 +330,10 @@ vcc-hdmi-supply = <®_dldo1>; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;
--
2.17.1