[PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes
From: mka@chromium.org (Matthias Kaehlcke)
Date: 2018-07-18 00:16:03
Also in:
linux-arm-msm, linux-devicetree, lkml
On Thu, Jul 12, 2018 at 02:09:08PM +0530, Amit Kucheria wrote:
quoted hunk ↗ jump to hunk
SDM845 has two tsens blocks, one with 13 sensors and the other with 8 sensors. It uses version 2 of the TSENS IP, so use the fallback property to allow more common code. Signed-off-by: Amit Kucheria <redacted> Reviewed-by: Bjorn Andersson <redacted> Tested-by: Matthias Kaehlcke <mka@chromium.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb..01ff146 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi@@ -221,6 +221,22 @@ #interrupt-cells = <2>; }; + tsens0: thermal-sensor at c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor at c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi at c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>,
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>