Thread (4 messages) 4 messages, 2 authors, 2018-07-17
STALE2875d

[PATCH v1 1/2] arm64: dts: mt7622: add some misc device nodes

From: ryder.lee@mediatek.com (Ryder Lee)
Date: 2018-07-16 14:59:21
Also in: linux-devicetree, linux-mediatek, lkml
Subsystem: arm/mediatek soc support, the rest · Maintainers: Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds

Add some misc nodes support - timer and ARM CCI-400.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7622.dtsi | 36 ++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9213c96..8cdec52 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -217,6 +217,16 @@
 		#reset-cells = <1>;
 	};
 
+	timer: timer at 10004000 {
+		compatible = "mediatek,mt7622-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10004000 0 0x80>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
+			 <&topckgen CLK_TOP_RTC>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
 	scpsys: scpsys at 10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";
@@ -317,6 +327,32 @@
 		      <0 0x10360000 0 0x2000>;
 	};
 
+	cci: cci at 10390000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x10390000 0 0x1000>;
+		ranges = <0 0 0x10390000 0x10000>;
+
+		cci_control0: slave-if at 1000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1: slave-if at 4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if at 5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
 	auxadc: adc at 11001000 {
 		compatible = "mediatek,mt7622-auxadc";
 		reg = <0 0x11001000 0 0x1000>;
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help