On Mon, Jul 09, 2018 at 11:44:20PM +0800, Icenowy Zheng wrote:

? 2018?7?9? GMT+08:00 ??11:20:54, Corentin Labbe [off-list ref] ??:

quoted

Hello

With Moeicenowy's agreement, I have take leadership ot this patchset.

There are no really changes appart renaming struct quirck to variant.

Since the last serie is really old, I will answer comment here.
The two regulator (1.2 and 2.5V) are not for the PHY since:
- nothing in the schematic said that they are for the PHY, they seems
 only for controller
- all other AHCI driver use 5V for the target/PHY (vs 1.2/2.5 which
 cannot be used for target)

Target is not equal to PHY. Target means the supply
of the disk, which can be usually 5v (for 2.5" HDD) or
12v (3.5" HDD).

By reading Wikipedia articles  about SATA and LVDS, I assume
2.5V is for PHY and 1.2V is for internal digital logic (VDD-SYS
is commonly 1.2V on 40nm Allwinner SoCs; 2.5V VDD can be
used to efficiently deliver ~1.2V LVDS.)

P.S. VDD-SATA and VDD25-SATA also exist on A20, and by checking
Banana Pi M1 (the original Banana Pi) schematics, VDD-SATA
is connected to common VDD-SYS (called INTVDD on the
schematics) and VDD25-SATA is connected to an always-on
fixed LDO, maybe due to the lack of power outputs on AXP209.

So we still need to add a regulator on the controller and add an optionnal "phy" regulator for AHCI port.