[PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes
From: Amit Kucheria <hidden>
Date: 2018-07-09 11:37:57
Also in:
linux-arm-msm, linux-devicetree, lkml
On Mon, Jul 9, 2018 at 4:57 PM, Amit Kucheria [off-list ref] wrote:
quoted hunk ↗ jump to hunk
SDM845 has two tsens blocks, one with 13 sensors and the other with 8 sensors. It uses version 2 of the TSENS IP, so use the fallback property to allow more common code. Signed-off-by: Amit Kucheria <redacted> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb..d97ee00 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi@@ -221,6 +221,22 @@ #interrupt-cells = <2>; }; + tsens0: tsens at c222000 {
Oops, sending out v6 to fix this.
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc263000 0x1ff>, /* TM */
+ <0xc222000 0x1ff>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: tsens at c223000 {
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc265000 0x1ff>, /* TM */
+ <0xc223000 0x1ff>; /* SROT */
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
spmi_bus: spmi at c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
--
2.7.4