Thread (16 messages) 16 messages, 2 authors, 2018-06-19
DORMANTno replies

[PATCH 4/5] [omap1] Bluetooth device code common to HTC smartphones

From: tony@atomide.com (Tony Lindgren)
Date: 2018-06-19 20:24:40
Also in: linux-omap

* Cory Maccarrone [off-list ref] [100808 20:22]:
On Wed, Aug 4, 2010 at 3:15 AM, Tony Lindgren [off-list ref] wrote:
quoted
* Cory Maccarrone [off-list ref] [100802 18:23]:
quoted
This change adds in a bluetooth controld driver/rfkill
interface to the serial bluetooth controller found on many
HTC smartphones such as the HTC Herald and HTC Wizard.
To me it looks like most of this should be in drivers/bluetooth/omap7xx.c
or something like that. Then you can just pass it the gpio numbers in
the platform_data.
Not sure I agree that it fits there.  The driver isn't really a
bluetooth driver -- it's really just an RFKILL interface, and some
code to toggle UART clocks on and off, plus GPIO work on a
board-specific level.  In principle, the gpios could be set and the
clocks enabled in the board files, and this driver wouldn't be
necessary to get working bluetooth (as we'd use hciattach on
/dev/ttyS*).  But then, we can't toggle it off for power saving.
Maybe a better place would be plat-omap/?  But it really is more
specific to these HTC boards, not the architecture itself.
Hmm well what we've used earlier is to set something like set_power
function pointer in the platform data, then call that in the driver
if set. But in this case the driver is 8250.c, so let's not mess
with that..

This issue should get properly solved with the omap specific serial
driver once we get that merged as then we can have hooks for set_power
in addition to cutting serial clocks when idle.
So really, the only point of this driver is to be able to power on and
off the external bluetooth chip, which is why I submitted it as helper
code to the board files.
Yeah. Can you take a look at the omap specific serial driver to get
it working on omap1?

Then you can have your GPIO functions set in the board-*.c file
as set_power or similar, and the UART driver can idle properly.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help