[PATCH v3 2/6] arm64: dts: actions: Add Actions Semiconductor S900 I2C controller nodes
From: Peter Rosin <hidden>
Date: 2018-06-30 20:57:59
Also in:
linux-devicetree, linux-gpio, linux-i2c, lkml
On June 30, 2018 3:33:26 PM GMT+02:00, Manivannan Sadhasivam [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Add I2C controller nodes for Actions Semiconductor S900 SoC. Signed-off-by: Manivannan Sadhasivam <redacted> --- arch/arm64/boot/dts/actions/s900.dtsi | 60 +++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)diff --git a/arch/arm64/boot/dts/actions/s900.dtsib/arch/arm64/boot/dts/actions/s900.dtsi index 7ae8b931f000..6f7b89edbe4d 100644--- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi@@ -174,6 +174,66 @@#clock-cells = <1>; }; + i2c0: i2c at e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; + }; + + i2c1: i2c at e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; + }; + + i2c2: i2c at e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; + }; + + i2c3: i2c at e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c at e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c at e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pinctrl: pinctrl at e01b0000 { compatible = "actions,s900-pinctrl"; reg = <0x0 0xe01b0000 0x0 0x1000>;
This patch *still* depends on patch 3/6. You need to reorder the series so that it is properly bisectable. Cheers, Peter