[PATCH v2 02/10] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
From: krzk@kernel.org (Krzysztof Kozlowski)
Date: 2018-06-28 07:41:34
Also in:
linux-devicetree, linux-samsung-soc, lkml
On 27 June 2018 at 19:12, Pawe? Chmiel [off-list ref] wrote:
quoted hunk ↗ jump to hunk
This DTS file have initial support Samsung Aries based phones. Initial version have support for: - sdcard - internal memory (present only on non 4g variant) - max8998 pmic and rtc - max17040 fuel gauge - gpio keys - fimd (no panel driver yet) - usb (peripherial mode) - wifi Signed-off-by: Pawe? Chmiel <redacted> --- Changes from v1: - Removed duplicated and unneeded headers - Corrected node names - Added missing spaces - Removed unneeded pinctrl and sorted entries - Set correct interrupt type for max8998 pmic - Add missing regulators --- --- arch/arm/boot/dts/s5pv210-aries.dtsi | 423 +++++++++++++++++++++++++++++++++++ 1 file changed, 423 insertions(+) create mode 100644 arch/arm/boot/dts/s5pv210-aries.dtsidiff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi new file mode 100644 index 000000000000..61b6cf76265f --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi@@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 based Galaxy Aries board device tree source + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "s5pv210.dtsi" + +/ { + compatible = "samsung,aries", "samsung,s5pv210"; + + aliases { + i2c6 = &i2c_pmic; + i2c9 = &i2c_fuel; + }; + + memory at 30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_gpio_rst>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <500>; + }; + + i2c_pmic: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic at 66 { + compatible = "maxim,max8998"; + reg = <0x66>; + interrupt-parent = <&gph0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + max8998,pmic-buck1-default-dvs-idx = <1>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>, + <1050000>, <950000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3600000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VGA_VDDIO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VGA_DVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_ISP_HOST_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VGA_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vddarm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1250000>; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vddint"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + }; + }; + }; + }; + + i2c_fuel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuelgauge at 36 { + compatible = "maxim,max17040"; + interrupt-parent = <&vic0>; + interrupts = <7>; + reg = <0x36>; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&pinctrl0 {
Thanks for changes. You missed one part - ordering the labels here
alphabetically, so:
&fimd {}
&hsotg {}
...
&xusbxti {}
Best regards,
Krzysztof