[PATCH v2 01/10] ARM: OMAP1: ams-delta: drop GPIO lookup table for serio device
From: jmkrzyszt@gmail.com (Janusz Krzysztofik)
Date: 2018-06-21 22:41:53
Also in:
linux-gpio, linux-input, linux-omap, lkml
Subsystem:
arm port, omap1 support, the rest · Maintainers:
Russell King, Aaro Koskinen, Janusz Krzysztofik, Linus Torvalds
GPIO lookup table for ams-delta-serio device was introduced by commit
0486738928bf ("ARM: OMAP1: ams-delta: add GPIO lookup tables").
Unfortunately, a follow up patch "Input: ams_delta_serio: use GPIO
lookup table" was not accepted by subystem maintainer who requested
conversion of the driver to a platform driver, replacepemnt of IRQ GPIO
pin with IRQ resource, replacement of GPIO pin providing keyboard power
with a regulator and removal of remaining GPIO pins from the driver as
not handled by it.
Let's start with removal of the no longer needed GPIO lookup table from
the board init file.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
Changelog:
v2: rebased on v4.18-rc1, no conflicts
arch/arm/mach-omap1/board-ams-delta.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 80f54cb54276..18e0ff437b27 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c@@ -504,20 +504,6 @@ static struct platform_device cx20442_codec_device = { .id = -1, }; -static struct gpiod_lookup_table ams_delta_serio_gpio_table = { - .table = { - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - "data", 0), - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - "clock", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, - "power", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, - "dataout", 0), - { }, - }, -}; - static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device,
@@ -534,7 +520,6 @@ static struct platform_device *late_devices[] __initdata = { static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_audio_gpio_table, - &ams_delta_serio_gpio_table, }; static struct gpiod_lookup_table *late_gpio_tables[] __initdata = {
@@ -580,10 +565,6 @@ static void __init ams_delta_init(void) */ ams_delta_audio_gpio_table.dev_id = dev_name(&ams_delta_audio_device.dev); - /* - * No device name is assigned to GPIO lookup table for serio device - * as long as serio driver is not converted to platform device driver. - */ gpiod_add_lookup_tables(ams_delta_gpio_tables, ARRAY_SIZE(ams_delta_gpio_tables));
--
2.16.4