* Nishanth Menon [off-list ref] [180619 19:46]:

+	cbass_main: cbass at 100000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
+			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
+			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
+			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
+			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+			 /* MCUSS Range */
+			 <0x28380000 0x00 0x28380000 0x03880000>,
+			 <0x40200000 0x00 0x40200000 0x00900100>,
+			 <0x42040000 0x00 0x42040000 0x03ac2400>,
+			 <0x45100000 0x00 0x45100000 0x00c24000>,
+			 <0x46000000 0x00 0x46000000 0x00200000>,
+			 <0x47000000 0x00 0x47000000 0x00068400>;
+
+		cbass_mcu: cbass at 28380000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
+				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
+				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
+				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
+				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+
+			cbass_wakeup: cbass at 42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};

You should use cbass_main: interconnect at 1000000 and so on here.
Other than that looks good to me, thanks for updating it.

Regards,

Tony