[PATCH v2 8/8] arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888
From: mperttunen@nvidia.com (Mikko Perttunen)
Date: 2018-06-20 12:21:35
Also in:
linux-devicetree, linux-serial, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The Tegra Combined UART is the proper primary serial port on P2888,
so use it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
---
Notes:
v2:
- Added Jon's Acked-by.
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 859ab5af17c1..95e2433984f7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi@@ -10,7 +10,7 @@ aliases { sdhci0 = "/cbb/sdhci at 3460000"; sdhci1 = "/cbb/sdhci at 3400000"; - serial0 = &uartb; + serial0 = &tcu; i2c0 = "/bpmp/i2c"; i2c1 = "/cbb/i2c at 3160000"; i2c2 = "/cbb/i2c at c240000";
--
2.16.1