[PATCH v8 2/6] dt-bindings: add binding for atmel-usart in SPI mode
From: Radu Pirea <hidden>
Date: 2018-06-18 10:07:51
Also in:
linux-devicetree, linux-serial, linux-spi, lkml
Subsystem:
microchip at91 usart mfd driver, multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Radu Pirea, Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch moves the bindings for serial from serial/atmel-usart.txt to
mfd/atmel-usart.txt and adds bindings for USART in SPI mode.
Signed-off-by: Radu Pirea <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +++++++++++++++++--
include/dt-bindings/mfd/at91-usart.h | 17 +++++++++++++
2 files changed, 40 insertions(+), 2 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 include/dt-bindings/mfd/at91-usart.h
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
similarity index 76%
rename from Documentation/devicetree/bindings/serial/atmel-usart.txt
rename to Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 7c0d6b2f53e4..3b9e18642c3b 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt@@ -1,6 +1,6 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) -Required properties: +Required properties for USART: - compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" The compatible <chip> indicated will be the first SoC to support an additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties: Required elements: "usart" - clocks: phandles to input clocks. -Optional properties: +Required properties for USART in SPI mode: +- #size-cells : Must be <0> +- #address-cells : Must be <1> +- cs-gpios: chipselects (internal cs not supported) +- atmel,usart-mode : Must be <USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) + +Optional properties in serial mode: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example: dma-names = "tx", "rx"; atmel,fifo-size = <32>; }; + +- SPI mode: + #include <dt-bindings/mfd/at91-usart.h> + + spi0: spi at f001c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; + atmel,usart-mode = <USART_MODE_SPI>; + reg = <0xf001c000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usart0_clk>; + clock-names = "usart"; + cs-gpios = <&pioB 3 0>; + };
diff --git a/include/dt-bindings/mfd/at91-usart.h b/include/dt-bindings/mfd/at91-usart.h
new file mode 100644
index 000000000000..2de5bc312e1e
--- /dev/null
+++ b/include/dt-bindings/mfd/at91-usart.h@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides macros for AT91 USART DT bindings. + * + * Copyright (C) 2018 Microchip Technology + * + * Author: Radu Pirea <radu.pirea@microchip.com> + * + */ + +#ifndef __DT_BINDINGS_AT91_USART_H__ +#define __DT_BINDINGS_AT91_USART_H__ + +#define AT91_USART_MODE_SERIAL 0 +#define AT91_USART_MODE_SPI 1 + +#endif /* __DT_BINDINGS_AT91_USART_H__ */
--
2.17.1