[PATCH 4.14 116/189] spi: bcm2835aux: ensure interrupts are enabled for shared handler

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring <robh@kernel.org>

[ Upstream commit bc519d9574618e47a0c788000fb78da95e18d953 ]

The BCM2835 AUX SPI has a shared interrupt line (with AUX UART).
Downstream fixes this with an AUX irqchip to demux the IRQ sources and a
DT change which breaks compatibility with older kernels. The AUX irqchip
was already rejected for upstream[1] and the DT change would break
working systems if the DTB is updated to a newer one. The latter issue
was brought to my attention by Alex Graf.

The root cause however is a bug in the shared handler. Shared handlers
must check that interrupts are actually enabled before servicing the
interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled.

[1] https://patchwork.kernel.org/patch/9781221/

Cc: Alexander Graf <redacted>
Cc: Marc Zyngier <redacted>
Cc: Mark Brown <broonie@kernel.org>
Cc: Eric Anholt <redacted>
Cc: Stefan Wahren <redacted>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list at broadcom.com
Cc: linux-spi at vger.kernel.org
Cc: linux-rpi-kernel at lists.infradead.org
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <redacted>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <redacted>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm2835aux.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c

@@ -184,6 +184,11 @@ static irqreturn_t bcm2835aux_spi_interr
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
 	irqreturn_t ret = IRQ_NONE;
 
+	/* IRQ may be shared, so return if our interrupts are disabled */
+	if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
+	      (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
+		return ret;
+
 	/* check if we have data to read */
 	while (bs->rx_len &&
 	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &