[PATCH v2 14/27] drm/sun4i: Don't check for panel or bridge on TV TCONs
From: Jernej Skrabec <hidden>
Date: 2018-06-12 20:02:30
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chen-Yu Tsai, Linus Torvalds
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by: Jernej Skrabec <redacted> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index b1205a7bc20f..c9ffa5381185 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c@@ -1189,13 +1189,19 @@ static const struct component_ops sun4i_tcon_ops = { static int sun4i_tcon_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; + const struct sun4i_tcon_quirks *quirks; struct drm_bridge *bridge; struct drm_panel *panel; int ret; - ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge); - if (ret == -EPROBE_DEFER) - return ret; + quirks = of_device_get_match_data(&pdev->dev); + + /* panels and bridges are present only on TCONs with channel 0 */ + if (quirks->has_channel_0) { + ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge); + if (ret == -EPROBE_DEFER) + return ret; + } return component_add(&pdev->dev, &sun4i_tcon_ops); }
--
2.17.1