[PATCH V2 2/4] clk: imx6sl: remove clks_init_on array
From: Anson Huang <hidden>
Date: 2018-06-04 01:10:43
Also in:
linux-clk, lkml
Subsystem:
common clk framework, nxp i.mx clock drivers, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Abel Vesa, Linus Torvalds
Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. IPG clock has no clock gate and its parent AHB clock is busy divider type, so no need to add CLK_IS_CRITICAL flag for IPG clock. Signed-off-by: Anson Huang <redacted> --- changes since V1: improve commit log to explain why no need to add CLK_IS_CRITICAL flag for ARM and IPG clocks. drivers/clk/imx/clk-imx6sl.c | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 66b1dd1..eb6bcbf 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c@@ -104,10 +104,6 @@ static struct clk_onecell_data clk_data; static void __iomem *ccm_base; static void __iomem *anatop_base; -static const u32 clks_init_on[] __initconst = { - IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, -}; - /* * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken * during WAIT mode entry process could cause cache memory
@@ -195,7 +191,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i; int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -426,13 +421,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) pr_warn("%s: failed to set AHB clock rate %d!\n", __func__, ret); - /* - * Make sure those always on clocks are enabled to maintain the correct - * usecount and enabling/disabling of parent PLLs. - */ - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
--
2.7.4