The touchscreen driver no longer configures the device as wakeup source by
default. A "wakeup-source" property is needed.

To avoid regressions, this patch changes the DTS files for the only two
users of this driver that didn't have this property yet.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 arch/arm/boot/dts/imx28-tx28.dts      | 1 +
 arch/arm/boot/dts/imx53-tx53-x03x.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 0ebbc83852d0..094a39a67ec8 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts

@@ -328,6 +328,7 @@
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007 at 48 {

diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 0ecb43d88522..dbf0d73dc7b9 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts

@@ -220,6 +220,7 @@
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007 at 48 {

-- 
2.14.3