[PATCH v9 14/15] dt-bindings: qcom_spmi: Document SAW support
From: Ilia Lin <hidden>
Date: 2018-05-21 11:27:45
Also in:
linux-arm-msm, linux-clk, linux-devicetree, linux-pm, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Document the DT bindings for the SAW regulators. The saw-leader is the only property that is configurable in DT. The saw-slave property allows ganging (grouping) of several regulators so that their outputs can be combined. Signed-off-by: Ilia Lin <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/regulator/qcom,spmi-regulator.txt | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 57d2c65..406f2e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt@@ -110,6 +110,11 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- qcom,saw-reg: + Usage: optional + Value type: <phandle> + Description: Reference to syscon node defining the SAW registers. + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each
@@ -201,6 +206,17 @@ see regulator.txt - with additional custom properties described below: 2 = 0.55 uA 3 = 0.75 uA +- qcom,saw-slave: + Usage: optional + Value type: <boo> + Description: SAW controlled gang slave. Will not be configured. + +- qcom,saw-leader: + Usage: optional + Value type: <boo> + Description: SAW controlled gang leader. Will be configured as + SAW regulator. + Example: regulators {
@@ -221,3 +237,32 @@ Example: .... }; + +Example 2: + + saw3: syscon at 9A10000 { + compatible = "syscon"; + reg = <0x9A10000 0x1000>; + }; + + ... + + spm-regulators { + compatible = "qcom,pm8994-regulators"; + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + pm8994_s11_saw: s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1140000>; + }; + };
--
1.9.1