[PATCH net-next v3 07/10] arm64: dts: marvell: mcbin: add 10G SFP support
From: Antoine Tenart <hidden>
Date: 2018-05-17 08:34:13
Also in:
lkml, netdev
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, marvell macchiatobin support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Russell King, Linus Torvalds
From: Russell King <redacted> This patch adds the SFP cage description in the Marvell Armada 8040 mcbin, for both 10G interfaces. Signed-off-by: Russell King <redacted> [Antoine: small reworks, commit message] Signed-off-by: Antoine Tenart <redacted> --- .../boot/dts/marvell/armada-8040-mcbin.dts | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 81de03ef860d..eaa67de8c2bb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts@@ -64,6 +64,30 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&v_5v0_usb3_hst_vbus>; }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + }; }; &uart0 {
@@ -180,6 +204,10 @@ "mpp60", "mpp61"; marvell,function = "sdio"; }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; }; &cp0_xmdio {
@@ -188,11 +216,13 @@ phy0: ethernet-phy at 0 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <0>; + sfp = <&sfp_eth0>; }; phy8: ethernet-phy at 8 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <8>; + sfp = <&sfp_eth1>; }; };
@@ -258,6 +288,10 @@ }; &cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1";
@@ -266,6 +300,10 @@ marvell,pins = "mpp6", "mpp7"; marvell,function = "uart0"; }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; }; /* J27 UART header */
--
2.17.0