[PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
From: linux@armlinux.org.uk (Russell King - ARM Linux)
Date: 2018-05-09 09:02:30
Also in:
linux-clk, linux-devicetree, lkml
On Wed, May 09, 2018 at 07:06:28AM +0200, Oleksij Rempel wrote:
On Tue, May 08, 2018 at 01:40:33PM +0100, Russell King - ARM Linux wrote:quoted
On Mon, Mar 05, 2018 at 11:25:19AM +0100, Oleksij Rempel wrote:quoted
One of the Freescale recommended sequences for power off with external PMIC is the following: ... 3. SoC is programming PMIC for power off when standby is asserted. 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. See: http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf page 5083 This patch implements step 4. of this sequence. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index ecdf071653d4..24689260a2a5 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c@@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata IMX6Q_GPR1_GINT); } +static void imx6_pm_stby_poweroff(void) +{ + imx6_set_lpm(STOP_POWER_OFF); + cpu_suspend(0, imx6q_suspend_finish);Do you actually need to save the processor state etc here - the request is after all to power down the system and not to suspend. Would calling imx6q_suspend_finish() directly work (and hence simplify the code) ?yes you right. This will work as well. I'll send changed version after Rafaels feedback for kernel/reboot.c part. Russell, can I expect your Signed-off-by for changed patch?
No, please read Documentation/process/submitting-patches.rst section 12. s-o-b does not apply in this case. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up