[PATCH net-next v2 11/13] arm64: dts: marvell: mcbin: enable the fourth network interface
From: Antoine Tenart <hidden>
Date: 2018-05-04 14:00:27
Also in:
lkml, netdev
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, marvell macchiatobin support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Russell King, Linus Torvalds
This patch enables the fourth network interface on the Marvell Macchiatobin. It is configured in the 2500Base-X PHY mode. The SFP cage is also described. Signed-off-by: Antoine Tenart <redacted> --- .../boot/dts/marvell/armada-8040-mcbin.dts | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index eaa67de8c2bb..a66958ff4de6 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts@@ -27,6 +27,7 @@ ethernet0 = &cp0_eth0; ethernet1 = &cp1_eth0; ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; }; /* Regulator labels correspond with schematics */
@@ -88,6 +89,18 @@ pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; }; + + sfp_eth3: sfp-eth3 { + /* CON3,4 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + }; }; &uart0 {
@@ -195,6 +208,10 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio";
@@ -287,6 +304,17 @@ phys = <&cp1_comphy0 1>; }; +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + &cp1_pinctrl { cp1_sfpp1_pins: sfpp1-pins { marvell,pins = "mpp8", "mpp10", "mpp11";
@@ -300,6 +328,10 @@ marvell,pins = "mpp6", "mpp7"; marvell,function = "uart0"; }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; cp1_sfpp0_pins: sfpp0-pins { marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; marvell,function = "gpio";
--
2.17.0