On Fri, May 04, 2018 at 01:47:31PM +0800, honghui.zhang at mediatek.com wrote:

From: Honghui Zhang <redacted>

Two fixups for mediatek's host bridge:
The first patch fixup class type and vendor ID for MT7622.
The second patch fixup the IRQ handle routine by using irq_chip solution
to avoid IRQ reentry which may exist for both MT2712 and MT7622.

Change since v6:
 - Remove the irq_mask, irq_unmask callback in lower layer irq_chip since we
   have set the MSI_FLAG_USE_DEF_CHIP_OPS flags.
 - Add irq_ack callback in irq_chip to handle edge IRQ.
 - Uing handle_edge_irq to handle the MSI IRQs.

Change since v5:
 - Make the comments consistend with the code modification in the first patch.
 - Using writew to performing a 16-bit write.
 - Using irq_chip solution to fix the IRQ issue.

The v5 patchset could be found in:
 https://patchwork.kernel.org/patch/10133303
 https://patchwork.kernel.org/patch/10133305

Change since v4:
 - Only setup vendor ID for MT7622, igorning the device ID since mediatek's
   host bridge driver does not cares about the device ID.

Change since v3:
 - Setup the class type and vendor ID at the beginning of startup instead
   of in a quirk.
 - Add mediatek's vendor ID, it could be found in:
   https://pcisig.com/membership/member-companies?combine=&page=4

Change since v2:
 - Move the initialize of the iterate before the loop to fix an
   INTx IRQ issue in the first patch

Change since v1:
 - Add the second patch.
 - Make the first patch's commit message more standard.

Honghui Zhang (2):
  PCI: mediatek: Set up vendor ID and class type for MT7622
  PCI: mediatek: Using chained IRQ to setup IRQ handle

 drivers/pci/host/pcie-mediatek.c | 234 +++++++++++++++++++++++----------------
 include/linux/pci_ids.h          |   2 +
 2 files changed, 143 insertions(+), 93 deletions(-)

Applied to pci/mediatek for v4.18, thanks.

Lorenzo