[PATCH 07/12] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol
From: hch@lst.de (Christoph Hellwig)
Date: 2018-04-15 14:59:42
Also in:
linux-block, linux-ide, linux-iommu, linux-mips, linux-mm, linux-pci, sparclinux
Subsystem:
arm port, arm64 port (aarch64 architecture), linux for powerpc (32-bit and 64-bit), memory management, memory management - core, mips, risc-v architecture, synopsys arc architecture, the rest, x86 architecture (32-bit and 64-bit) · Maintainers:
Russell King, Catalin Marinas, Will Deacon, Madhavan Srinivasan, Michael Ellerman, Andrew Morton, David Hildenbrand, Thomas Bogendoerfer, Paul Walmsley, Palmer Dabbelt, Albert Ou, Vineet Gupta, Linus Torvalds, Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen
Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a 64-bit phys_addr_t type directly. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/arc/Kconfig | 4 +--- arch/arm/kernel/setup.c | 2 +- arch/arm/mm/Kconfig | 4 +--- arch/arm64/Kconfig | 3 --- arch/mips/Kconfig | 15 ++++++--------- arch/powerpc/Kconfig | 5 +---- arch/powerpc/platforms/Kconfig.cputype | 1 + arch/riscv/Kconfig | 6 ++---- arch/x86/Kconfig | 5 +---- mm/Kconfig | 2 +- 10 files changed, 15 insertions(+), 32 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index d76bf4a83740..f94c61da682a 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig@@ -453,13 +453,11 @@ config ARC_HAS_PAE40 default n depends on ISA_ARCV2 select HIGHMEM + select PHYS_ADDR_T_64BIT help Enable access to physical memory beyond 4G, only supported on ARC cores with 40 bit Physical Addressing support -config ARCH_PHYS_ADDR_T_64BIT - def_bool ARC_HAS_PAE40 - config ARCH_DMA_ADDR_T_64BIT bool
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index fc40a2b40595..35ca494c028c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c@@ -754,7 +754,7 @@ int __init arm_add_memory(u64 start, u64 size) else size -= aligned_start - start; -#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT +#ifndef CONFIG_PHYS_ADDR_T_64BIT if (aligned_start > ULONG_MAX) { pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n", (long long)start);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7f14acf67caf..2f77c6344ef1 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig@@ -661,6 +661,7 @@ config ARM_LPAE bool "Support for the Large Physical Address Extension" depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ !CPU_32v4 && !CPU_32v3 + select PHYS_ADDR_T_64BIT help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the
@@ -673,9 +674,6 @@ config ARM_PV_FIXUP def_bool y depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE -config ARCH_PHYS_ADDR_T_64BIT - def_bool ARM_LPAE - config ARCH_DMA_ADDR_T_64BIT bool
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 940adfb9a2bc..b6aa33e642cc 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig@@ -152,9 +152,6 @@ config ARM64 config 64BIT def_bool y -config ARCH_PHYS_ADDR_T_64BIT - def_bool y - config MMU def_bool y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 47d72c64d687..985388078872 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig@@ -132,7 +132,7 @@ config MIPS_GENERIC config MIPS_ALCHEMY bool "Alchemy processor based machines" - select ARCH_PHYS_ADDR_T_64BIT + select PHYS_ADDR_T_64BIT select CEVT_R4K select CSRC_R4K select IRQ_MIPS_CPU
@@ -890,7 +890,7 @@ config CAVIUM_OCTEON_SOC bool "Cavium Networks Octeon SoC based boards" select CEVT_R4K select ARCH_HAS_PHYS_TO_DMA - select ARCH_PHYS_ADDR_T_64BIT + select PHYS_ADDR_T_64BIT select DMA_COHERENT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN
@@ -936,7 +936,7 @@ config NLM_XLR_BOARD select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL - select ARCH_PHYS_ADDR_T_64BIT + select PHYS_ADDR_T_64BIT select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select DMA_COHERENT
@@ -962,7 +962,7 @@ config NLM_XLP_BOARD select HW_HAS_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL - select ARCH_PHYS_ADDR_T_64BIT + select PHYS_ADDR_T_64BIT select GPIOLIB select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -1102,7 +1102,7 @@ config FW_CFE bool config ARCH_DMA_ADDR_T_64BIT - def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT + def_bool (HIGHMEM && PHYS_ADDR_T_64BIT) || 64BIT config ARCH_SUPPORTS_UPROBES bool
@@ -1767,7 +1767,7 @@ config CPU_MIPS32_R5_XPA depends on SYS_SUPPORTS_HIGHMEM select XPA select HIGHMEM - select ARCH_PHYS_ADDR_T_64BIT + select PHYS_ADDR_T_64BIT default n help Choose this option if you want to enable the Extended Physical
@@ -2399,9 +2399,6 @@ config SB1_PASS_2_1_WORKAROUNDS default y -config ARCH_PHYS_ADDR_T_64BIT - bool - choice prompt "SmartMIPS or microMIPS ASE support"
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 39c5377a5460..8bdcd7e44838 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig@@ -13,11 +13,8 @@ config 64BIT bool default y if PPC64 -config ARCH_PHYS_ADDR_T_64BIT - def_bool PPC64 || PHYS_64BIT - config ARCH_DMA_ADDR_T_64BIT - def_bool ARCH_PHYS_ADDR_T_64BIT + def_bool PHYS_ADDR_T_64BIT config MMU bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 67d3125d0610..84b58abc08ee 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype@@ -222,6 +222,7 @@ config PTE_64BIT config PHYS_64BIT bool 'Large physical address support' if E500 || PPC_86xx depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx + select PHYS_ADDR_T_64BIT ---help--- This option enables kernel support for larger than 32-bit physical addresses. This feature may not be available on all cores.
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 23d8acca5c90..f52f86f43a4b 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig@@ -5,6 +5,8 @@ config RISCV def_bool y + # even on 32-bit, physical (and DMA) addresses are > 32-bits + select PHYS_ADDR_T_64BIT select OF select OF_EARLY_FLATTREE select OF_IRQ
@@ -38,10 +40,6 @@ config RISCV config MMU def_bool y -# even on 32-bit, physical (and DMA) addresses are > 32-bits -config ARCH_PHYS_ADDR_T_64BIT - def_bool y - config ZONE_DMA32 bool default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 414043303ea1..15f228984e70 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig@@ -1447,6 +1447,7 @@ config HIGHMEM config X86_PAE bool "PAE (Physical Address Extension) Support" depends on X86_32 && !HIGHMEM4G + select PHYS_ADDR_T_64BIT select SWIOTLB ---help--- PAE is required for NX support, and furthermore enables
@@ -1474,10 +1475,6 @@ config X86_5LEVEL Say N if unsure. -config ARCH_PHYS_ADDR_T_64BIT - def_bool y - depends on X86_64 || X86_PAE - config ARCH_DMA_ADDR_T_64BIT def_bool y depends on X86_64 || HIGHMEM64G
diff --git a/mm/Kconfig b/mm/Kconfig
index d5004d82a1d6..a3f0005ac212 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig@@ -266,7 +266,7 @@ config ARCH_ENABLE_THP_MIGRATION bool config PHYS_ADDR_T_64BIT - def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT + def_bool 64BIT config BOUNCE bool "Enable bounce buffers"
--
2.17.0