Thread (19 messages) 19 messages, 2 authors, 2018-03-19
STALE3050d

[PATCH v2 6/8] mmc: sunxi: Move the reset deassertion before enabling the clocks

From: Ulf Hansson <hidden>
Date: 2018-03-15 10:24:09
Also in: linux-mmc

On 8 March 2018 at 15:52, Maxime Ripard [off-list ref] wrote:
As per Allwinner guidelines, the reset line should be deasserted before
turning the clocks on.

Implement it in our driver as well.

Signed-off-by: Maxime Ripard <redacted>
Thanks, applied for next!

Kind regards
Uffe
quoted hunk ↗ jump to hunk
---
 drivers/mmc/host/sunxi-mmc.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 34bc90bc04b2..c6431f6e816f 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1188,10 +1188,19 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
 {
        int ret;

+       if (!IS_ERR(host->reset)) {
+               ret = reset_control_reset(host->reset);
+               if (ret) {
+                       dev_err(host->dev, "Couldn't reset the MMC controller (%d)\n",
+                               ret);
+                       return ret;
+               }
+       }
+
        ret = clk_prepare_enable(host->clk_ahb);
        if (ret) {
-               dev_err(dev, "Couldn't enable the bus clocks (%d)\n", ret);
-               return ret;
+               dev_err(host->dev, "Couldn't enable the bus clocks (%d)\n", ret);
+               goto error_assert_reset;
        }

        ret = clk_prepare_enable(host->clk_mmc);
@@ -1212,28 +1221,16 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
                goto error_disable_clk_output;
        }

-       if (!IS_ERR(host->reset)) {
-               ret = reset_control_reset(host->reset);
-               if (ret) {
-                       dev_err(dev, "Couldn't reset the MMC controller (%d)\n",
-                               ret);
-                       goto error_disable_clk_sample;
-               }
-       }
-
        /*
         * Sometimes the controller asserts the irq on boot for some reason,
         * make sure the controller is in a sane state before enabling irqs.
         */
        ret = sunxi_mmc_reset_host(host);
        if (ret)
-               goto error_assert_reset;
+               goto error_disable_clk_sample;

        return 0;

-error_assert_reset:
-       if (!IS_ERR(host->reset))
-               reset_control_assert(host->reset);
 error_disable_clk_sample:
        clk_disable_unprepare(host->clk_sample);
 error_disable_clk_output:
@@ -1242,6 +1239,9 @@ static int sunxi_mmc_enable(struct sunxi_mmc_host *host)
        clk_disable_unprepare(host->clk_mmc);
 error_disable_clk_ahb:
        clk_disable_unprepare(host->clk_ahb);
+error_assert_reset:
+       if (!IS_ERR(host->reset))
+               reset_control_assert(host->reset);
        return ret;
 }
@@ -1249,13 +1249,13 @@ static void sunxi_mmc_disable(struct sunxi_mmc_host *host)
 {
        sunxi_mmc_reset_host(host);

-       if (!IS_ERR(host->reset))
-               reset_control_assert(host->reset);
-
        clk_disable_unprepare(host->clk_sample);
        clk_disable_unprepare(host->clk_output);
        clk_disable_unprepare(host->clk_mmc);
        clk_disable_unprepare(host->clk_ahb);
+
+       if (!IS_ERR(host->reset))
+               reset_control_assert(host->reset);
 }

 static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
--
git-series 0.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help