On 03/27/2018 12:24 AM, Sekhar Nori wrote:

Hi Suman,

On Tuesday 27 March 2018 06:12 AM, Suman Anna wrote:

quoted

I tried booting your tree [3] on the OMAPL138-LCDK board. I am using
NFS, and I am unable to get to the console. I don't have any issues
booting latest -next branch (next-20180326) which only has the reset and
clock driver related changes.

Here's the log towards the end of the boot..
---
pinctrl-single 1c14120.pinmux: 160 pins, size 80
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
console [ttyS2] disabled
1d0d000.serial: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000)
is a TI DA8xx/66AK2x
console [ttyS2] enabled
brd: module loaded
libphy: Fixed MDIO Bus: probed
davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000
davinci_mdio 1e24000.mdio: no live phy, scanning all
davinci_mdio: probe of 1e24000.mdio failed with error -5
i2c /dev entries driver
<nothing after this>

This is because of a bug in bootloader PLL configuration which got
uncovered only with CCF conversion. The bootloader that comes
pre-flashed with the board or the latest U-Boot master should work fine.

Here is the log with latest U-Boot master:
https://pastebin.ubuntu.com/p/HkwY9g4YDc/

Thanks Sekhar, able to boot and test after using the latest u-boot.

regards
Suman