On 17 March 2018 at 00:19, Ard Biesheuvel [off-list ref] wrote:

On 10 March 2018 at 15:01, Ard Biesheuvel [off-list ref] wrote:

quoted

On 2 March 2018 at 08:31, Ard Biesheuvel [off-list ref] wrote:

quoted

Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.

I think this is good to go now. Wolfram?

Ping?

Ping?

Hello Wolfram,

Do you intend to queue this for v4.17? Or are there any issues that
need to be addressed first?

Thanks,
Ard.

quoted

quoted

v5:
- add Rob's ack to #1
- drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2)

v4:
- clarify binding that only a single interrupt specifier is expected (#1)
- check return value of clk_prepare_enable() on probe path (#2)
- add Andy's R-b to patch #2

v3:
- incorporate more of Andy's review comments (#2), especially regarding the
  bus speed and clock source handling for ACPI
- patch #1 unchanged.

v2:
- incorporate Andy's review comments (#2)
- patch #1 unchanged.

Ard Biesheuvel (2):
  dt-bindings: i2c: add binding for Socionext SynQuacer I2C
  i2c: add support for Socionext SynQuacer I2C controller

 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt |  29 +
 drivers/i2c/busses/Kconfig                              |  10 +
 drivers/i2c/busses/Makefile                             |   1 +
 drivers/i2c/busses/i2c-synquacer.c                      | 791 ++++++++++++++++++++
 4 files changed, 831 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
 create mode 100644 drivers/i2c/busses/i2c-synquacer.c

--
2.11.0