[PATCH v6 25/25] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916
From: Ulf Hansson <hidden>
Date: 2018-03-14 17:00:22
Also in:
linux-arm-msm, linux-pm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
From: Lina Iyer <redacted> In the hierarchical layout, we are creating power domains around each CPU and describes the idle states for them inside the power domain provider node. Note that, the CPU's idle states still needs to be compatible with "arm,idle-state". Furthermore, represent the CPU cluster as a separate master power domain, powering the CPU's power domains. The cluster node, contains the idle states for the cluster and each idle state needs to be compatible with the "domain-idle-state". If the running platform is using a PSCI FW that supports the OS initiated CPU suspend mode, which likely should be the case unless the PSCI FW is very old, this change makes the PSCI driver to enable it. Cc: Andy Gross <redacted> Cc: David Brown <redacted> Cc: Lina Iyer <redacted> Signed-off-by: Lina Iyer <redacted> Co-developed-by: Ulf Hansson <redacted> Signed-off-by: Ulf Hansson <redacted> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 53 ++++++++++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e51b049..d0bb0b9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi@@ -112,7 +112,7 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + power-domains = <&CPU_PD0>; }; CPU1: cpu at 1 {
@@ -121,7 +121,7 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + power-domains = <&CPU_PD1>; }; CPU2: cpu at 2 {
@@ -130,7 +130,7 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + power-domains = <&CPU_PD2>; }; CPU3: cpu at 3 {
@@ -139,7 +139,7 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + power-domains = <&CPU_PD3>; }; L2_0: l2-cache {
@@ -156,12 +156,57 @@ min-residency-us = <2000>; local-timer-stop; }; + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x1000010>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x1000030>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; }; psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu-pd0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SPC>; + }; + + CPU_PD1: cpu-pd1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SPC>; + }; + + CPU_PD2: cpu-pd2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SPC>; + }; + + CPU_PD3: cpu-pd3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SPC>; + }; + + CLUSTER_PD: cluster-pd { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; }; pmu {
--
2.7.4