Hi,

Il 02/03/2018 15:37, Maxime Ripard ha scritto:

On Fri, Mar 02, 2018 at 12:42:14PM +0100, Giulio Benetti wrote:

quoted

Hi,

Il 01/03/2018 10:57, Maxime Ripard ha scritto:

quoted

On Wed, Feb 28, 2018 at 06:53:52PM +0100, Giulio Benetti wrote:

quoted

   static struct drm_connector_helper_funcs sun4i_lvds_con_helper_funcs = {
   	.get_modes	= sun4i_lvds_get_modes,
+	.mode_valid	= sun4i_lvds_mode_valid,
   };

This should be on the encoder, not the connector.

I've seen it is bound to connector in rgb and to encoder in hdmi.
Is it correct rgb mode_valid under connector funcs?
Otherwise I send a patch also for that one.

This would need to be fixed as well. Bridges attach to encoder, not
connectors, so if you ever have a bridge connected to the RGB output
(like on the A13-Olinuxino), mode_valid isn't called at the moment.

Ok, I will do the same for rgb and submit a patchset,
need some time to test both lvds and rgb.

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale ? 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642