[PATCH v3 5/7] mtd: nand: use Marvell reworked NAND controller driver with all platforms

On Tue,  9 Jan 2018 11:36:35 +0100
Miquel Raynal [off-list ref] wrote:

Actually remove pxa3xx_nand.c to let marvell_nand.c be compiled instead.
Also change the defconfig files using it as well as some board files
depending on CONFIG_MTD_NAND_PXA3xx.

Signed-off-by: Miquel Raynal <redacted>
---
 arch/arm/configs/cm_x300_defconfig  |    2 +-
 arch/arm/configs/pxa3xx_defconfig   |    3 +-
 arch/arm/configs/pxa_defconfig      |    2 +-
 arch/arm/configs/raumfeld_defconfig |    2 +-
 arch/arm/mach-mmp/ttc_dkb.c         |    4 +-
 arch/arm/mach-pxa/cm-x300.c         |    2 +-
 arch/arm/mach-pxa/colibri-pxa3xx.c  |    2 +-
 arch/arm/mach-pxa/colibri.h         |    2 +-
 arch/arm/mach-pxa/littleton.c       |    4 +-
 arch/arm/mach-pxa/mxm8x10.c         |    4 +-
 arch/arm/mach-pxa/zylonite.c        |    4 +-
 drivers/mtd/nand/Kconfig            |   11 -
 drivers/mtd/nand/Makefile           |    1 -
 drivers/mtd/nand/pxa3xx_nand.c      | 2104 -----------------------------------

Can you please split this patch in 2, one that patches defconfig and
board files to use the new driver and one that actually removes the old
driver.

Thanks,

Boris

-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com