[PATCH 2/3] dt-bindings: regulator: describe da9062's regulator modes
From: Christoph Fritz <hidden>
Date: 2018-02-09 10:05:20
Also in:
linux-devicetree
Subsystem:
dialog semiconductor drivers, multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Support Opensource, Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2018-02-09 · Re: [PATCH 2/3] dt-bindings: regulator: describe da9062's regulator modes · Fabio Estevam <hidden>
This patch adds DT description of da9062's buck regulator modes. Signed-off-by: Christoph Fritz <redacted> --- Documentation/devicetree/bindings/mfd/da9062.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index c0a418c..b871bc2 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt@@ -64,6 +64,14 @@ Sub-nodes: ldo3 : LDO_3 ldo4 : LDO_4 + The DA9062 regulators optionally support setting "regulator-initial-mode" + and "regulator-mode" for its buck nodes to following numbers listed below: + + 0 : BUCK_MODE_MANUAL + 1 : BUCK_MODE_SLEEP + 2 : BUCK_MODE_SYNC + 3 : BUCK_MODE_AUTO + The component follows the standard regulator framework and the bindings details of individual regulator device can be found in: Documentation/devicetree/bindings/regulator/regulator.txt
--
2.1.4