[PATCH 3/9] drm/bridge: dw-hdmi: allow overriding of phy-type reading
From: heiko@sntech.de (Heiko Stuebner)
Date: 2018-02-05 14:34:29
Also in:
dri-devel, linux-devicetree, linux-rockchip
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Linus Torvalds
In some IP implementations the reading of the phy-type may be broken. One example are the Rockchip rk3228 and rk3328 socs that use a separate phy from Innosilicon but still report the HDMI20_TX type. So allow the glue driver to force a specific type, like the vendor-phy for these cases. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 +++- include/drm/bridge/dw_hdmi.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a38db40ce990..7255fafce089 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c@@ -2200,7 +2200,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi) unsigned int i; u8 phy_type; - phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID); + phy_type = (hdmi->plat_data->phy_force_type) ? + hdmi->plat_data->phy_force_type : + hdmi_readb(hdmi, HDMI_CONFIG2_ID); if (phy_type == DW_HDMI_PHY_VENDOR_PHY) { /* Vendor PHYs require support from the glue layer. */
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 182f83283e24..c5bc2804b29e 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h@@ -133,6 +133,7 @@ struct dw_hdmi_plat_data { const struct dw_hdmi_phy_ops *phy_ops; const char *phy_name; void *phy_data; + u8 phy_force_type; /* Synopsys PHY support */ const struct dw_hdmi_mpll_config *mpll_cfg;
--
2.15.1