[PATCH v3] arm64: dts: rockchip: add roc-rk3328-cc board

Hi Levin,

Am Dienstag, 23. Januar 2018, 03:10:17 CET schrieb djw at t-chip.com.cn:

From: Levin Du <redacted>

Hi all,

v3:
Use pmic at 18 instead of rk805 at 18
Use macro definition RK_Pxx in gpio number

v2:
Use SPDX license tag

Thanks.

The roc-rk3328-cc is a credit card size single board computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD
Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver,
SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

Signed-off-by: Levin Du <redacted>

I've applied the patch for 4.17 with some changes:
- dropped the version prose in the commit message as noted by Rob
- dropped the usbdrd3 elements for the time being.
  Definitly not your fault and I did pick up the core usb3 enablement
  for the rk3328, but it looks like this needs a bit more time as the phy
  has this issue of not recognizing device unpluggs, making the controller
  not taking any plug events after that at all.
  So I want to make that actually work, before I bind myself to the binding
  using the dwc3-of-simple stuff.
  We can readd the dwc3 nodes to the roc-3328-cc once that works correctly.

Heiko