[PATCH V2 1/5] dt-bindings: mmc: document the stm32 sdmmc bindings
From: Ludovic Barre <hidden>
Date: 2018-02-28 15:47:58
Also in:
linux-devicetree, linux-mmc, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Ludovic Barre <redacted> Document the binding for stm32 sdmmc controller. Signed-off-by: Ludovic Barre <redacted> --- .../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
diff --git a/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
new file mode 100644
index 0000000..74d0bff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt@@ -0,0 +1,35 @@ +* STMicroelectronics STM32 SDMMC controller + +The highspeed MMC host controller on STM32 soc family +provides an interface for MMC, SD and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdmmc driver. + +Required properties: + - compatible: Should be "st,stm32h7-sdmmc" + - reg: mmc controller base registers + - interrupts: Should contain the interrupt number + - clocks: Should contain phandle for the clock feeding the controller + - resets: Should contain phandle for the reset feeding the controller + +Optional property: +- st,dir-output-high: Allow to select direction polarity of external voltage + transceiver (which manage data and command direction). + if set: Voltage transceiver IOs are driven as output when direction signals are high, + else: Voltage transceiver IOs are driven as output when direction signals are low. +- st,neg-edge: generate data & command on sdmmc clock falling edge +- st,use-ckin: use sdmmc_ckin pin from an external driver to sample + the receive data (example: with voltage switch transceiver). + +Example: + sdmmc1: mmc at 52007000 { + compatible = "st,stm32h7-sdmmc"; + reg = <0x52007000 0x1000>; + interrupts = <49>; + clocks = <&rcc SDMMC1_CK>; + resets = <&rcc SDMMC1_R>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + };
--
2.7.4