[PATCH 0/3] add CPUs OPPs to sun8i a83t

On Wed, Feb 28, 2018 at 02:11:19PM +0100, Quentin Schulz wrote:

Hi all,

The Allwinner A83T is an octacore A7 divided in two clusters of 4 A7,
each cluster having its own regulator and clock.

Let's add the OPPs for each cluster so that we can use cpufreq on this SoC.

The operating points were found in Allwinner BSP and fex files and have
been tested on a TBS A711 with cpuburn and cpufreq-ljt-stress-test.

Note that there are a few OPPs that are missing:

1608000000Hz with 920000mV
1800000000Hz with 1000000mV
2016000000Hz with 1080000mV

These OPPs are pretty unstable but it might be due to the SoC quickly
overheating (till the board completely shuts down).
It seems[1] impossible to reach those frequencies with none or passive
cooling, so better leave them out by default.

It's still possible to add those OPPs on a per-board basis though.

[1] http://linux-sunxi.org/User:Tkaiser#First_steps_with_Banana_Pi_M3

Applied all three. The patch 3/3 wasn't ordered properly, so I fixed
it, and I removed the newline pointed out by Thomas.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180228/9f243e83/attachment.sig>