? 2018?2?27? GMT+08:00 ??12:16:44, "Jernej ?krabec" [off-list ref] ??:

Hi Julian,

Dne nedelja, 25. februar 2018 ob 09:11:34 CET je Julian Calaby
napisal(a):

quoted

Hi Jernej,

On Sun, Feb 25, 2018 at 8:45 AM, Jernej Skrabec

[off-list ref] 
wrote:

quoted

quoted

Enable HDMI output on all boards which have HDMI connector.

Signed-off-by: Jernej Skrabec <redacted>
---

 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25
 ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-beelink-x2.dts  

quoted

quoted

  | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25
 ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts   

quoted

quoted

  | 25 ++++++++++++++++++++++

arch/arm/boot/dts/sun8i-h3-orangepi-2.dts  

quoted

quoted

        | 25 ++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25
 ++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3-orangepi-one.dts

quoted

quoted

  | 24 +++++++++++++++++++++

arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts  

quoted

quoted

       | 25 ++++++++++++++++++++++ 8 files changed, 199

insertions(+)

quoted

As I understand it, the H2+ is just a slightly trimmed down H3. In
terms of HDMI support, the difference is that the H2+ can't output

4k.

quoted

If this code is compatible with the H2+, could you please add the
necessary bits and pieces to the h2-plus DTSs too?

There are only 3 H2+ boards in kernel and none of them has HDMI
connector, so 

BPi M2 Zero has miniHDMI connector.

there's nothing to do actually. But if such board is added to kernel,
it would 
be trivially add proper nodes, since all H2+ boards include H3 DTSI.

Best regards,
Jernej