[PATCH v2 1/2] ASoC: add DT bindings documentation for ROHM BD28623 codec
From: Katsuhiro Suzuki <hidden>
Date: 2018-02-23 01:17:25
Also in:
alsa-devel, linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
This patch adds DT bindings documentation for ROHM BD28623MUV class D speaker amplifier. Signed-off-by: Katsuhiro Suzuki <redacted> --- Changes in v2: - Change gpio properties to optional - Change VCCA, VCCP-supply to mandatory --- .../devicetree/bindings/sound/rohm,bd28623.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
new file mode 100644
index 000000000000..d84557c2686e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt@@ -0,0 +1,29 @@ +ROHM BD28623MUV Class D speaker amplifier for digital input + +This codec does not have any control buses such as I2C, it detect format and +rate of I2S signal automatically. It has two signals that can be connected +to GPIOs: reset and mute. + +Required properties: +- compatible : should be "rohm,bd28623" +- #sound-dai-cells: should be 0. +- VCCA-supply : regulator phandle for the VCCA supply +- VCCP1-supply : regulator phandle for the VCCP1 supply +- VCCP2-supply : regulator phandle for the VCCP2 supply + +Optional properties: +- reset-gpios : GPIO specifier for the active low reset line +- mute-gpios : GPIO specifier for the active low mute line + +Example: + + codec { + compatible = "rohm,bd28623"; + #sound-dai-cells = <0>; + + VCCA-supply = <&vcc_reg>; + VCCP1-supply = <&vcc_reg>; + VCCP2-supply = <&vcc_reg>; + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + };
--
2.16.1