[PATCH v3 02/11] ARM: dts: STi: Move leds node outside soc node
From: patrice.chotard at st.com <hidden>
Date: 2018-02-13 12:56:43
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Patrice Chotard <redacted> Leds are not part of soc, so nove them outside soc node. This allows to fix the following warnings when compiling dtb with W=1 option : arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg): Node /soc/leds missing or empty reg/ranges property arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg): Node /soc/leds missing or empty reg/ranges property arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg): Node /soc/leds missing or empty reg/ranges property Signed-off-by: Patrice Chotard <redacted> --- v3: _ none v2: _ none arch/arm/boot/dts/stih410-b2260.dts | 49 ++++++++++++++++++------------------ arch/arm/boot/dts/stih418-b2199.dts | 26 +++++++++---------- arch/arm/boot/dts/stihxxx-b2120.dtsi | 26 +++++++++---------- 3 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index faafc7b12951..69c2abcaeda8 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts@@ -29,36 +29,35 @@ ethernet0 = ðernet0; }; - soc { - - leds { - compatible = "gpio-leds"; - user_green_1 { - label = "User_green_1"; - gpios = <&pio1 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + leds { + compatible = "gpio-leds"; + user_green_1 { + label = "User_green_1"; + gpios = <&pio1 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; - user_green_2 { - label = "User_green_2"; - gpios = <&pio4 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_2 { + label = "User_green_2"; + gpios = <&pio4 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_3 { - label = "User_green_3"; - gpios = <&pio2 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_3 { + label = "User_green_3"; + gpios = <&pio2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_4 { - label = "User_green_4"; - gpios = <&pio2 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_4 { + label = "User_green_4"; + gpios = <&pio2 5 GPIO_ACTIVE_LOW>; + default-state = "off"; }; + }; + soc { /* Low speed expansion connector */ uart0: serial at 9830000 { label = "LS-UART0";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 5418a0ece659..1ce38ce79952 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts@@ -28,24 +28,24 @@ ethernet0 = ðernet0; }; + leds { + compatible = "gpio-leds"; + red { + label = "Front Panel LED"; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + soc { sbc_serial0: serial at 9530000 { status = "okay"; }; - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - i2c at 9842000 { status = "okay"; };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 68783e8223b8..1fd3a2b5b938 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi@@ -10,24 +10,24 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/c8sectpfe.h> / { + leds { + compatible = "gpio-leds"; + red { + label = "Front Panel LED"; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + soc { sbc_serial0: serial at 9530000 { status = "okay"; }; - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - pwm0: pwm at 9810000 { status = "okay"; };
--
1.9.1