[linux-sunxi] [PATCH v2 5/6] arm64: allwinner: h6: add the basical Allwinner H6 DTSI file
From: andre.przywara@arm.com (André Przywara)
Date: 2018-02-11 23:27:08
Also in:
linux-clk, linux-devicetree, linux-gpio, lkml
Hi, On 03/02/18 15:49, Icenowy Zheng wrote:
Allwinner H6 is a new SoC with Cortex-A53 cores from Allwinner, with its memory map fully reworked and some high-speed peripherals (PCIe, USB 3.0) introduced. This commit adds the basical DTSI file of it, including the clock support and UART support.
Checked the MMIO addresses and the interrupt numbers against the manual.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com> Thanks! Andre.
quoted hunk ↗ jump to hunk
--- Changes in v2: - Add APB1 clock as PIO's APB clock. - Switched to SPDX license identifier. arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 178 +++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsidiff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi new file mode 100644 index 000000000000..d4697bb42496 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi@@ -0,0 +1,178 @@ +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + * + * SPDX-License-Identifier: (GPL-2.0+ or MIT) + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu1: cpu at 1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu2: cpu at 2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu3: cpu at 3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ccu: clock at 3001000 { + compatible = "allwinner,sun50i-h6-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gic: interrupt-controller at 3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pio: pinctrl at 300b000 { + compatible = "allwinner,sun50i-h6-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_ph_pins: uart0-ph { + pins = "PH0", "PH1"; + function = "uart0"; + }; + }; + + uart0: serial at 5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial at 5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial at 5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial at 5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + }; +};