[PATCH 0/3] Fix broken bananapi m2 devicetree/regulators

Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev:

On 02/11/2018 01:07 AM, Philipp Rossak wrote:

quoted

On 10.02.2018 22:08, Sergey Suloev wrote:

quoted

On 02/11/2018 12:01 AM, Philipp Rossak wrote:

quoted

Hey Sergey,

Thanks for mentioning, but I think the problem has nothing to
do?
with those patches. I tested them with the v4.15.0 Kernel since
this?
is the last stable release and we are right now in the merging
window.

I tested the latest mainline, without those patches and the
kernel?
is not booting (I can't see any uart output).

Thanks,
Philipp

On 10.02.2018 14:56, Sergey Suloev wrote:

quoted

On 02/09/2018 08:52 PM, Philipp Rossak wrote:

quoted

This patchseries fixes the bananapi m1 devicetree, to be
able to?
boot again.
The first two patches update/improve the devicetree and the
last?
patch adds
all missing regulators.

Regards,
Philipp

Philipp Rossak (3):
?? arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
?? arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
?? arm: dts: sun6i: a31s: fix: bpi-m2: add missing
regulators

? arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70?
+++++++++++++++++++++++-
? 1 file changed, 67 insertions(+), 3 deletions(-)

patches are not working

Thanks

same problem, but after applying the patches my device is till
hanging.

Can you please share a bootlog? Here is mine [1]. As you can see
I'm?
able to boot.
I build it with this branch [2]. For testing you should replace
the?
dtb and the uImage/zImage

Philipp


[1]: https://pastebin.com/mVjv3LDf
[2]:?
https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes
t-2

My dmesg is very similar to yours unless it hangs on the last line
[1].?
For this test I used kernel from tag v4.15 with no additional
patching.

[1] https://pastebin.com/3a6bk5Dk

For me it looks like you have a different kernel and also an different
dtb that you patch! And you are applying also a fixup script.
These patches should be applied on top of linux mainline. 

fixup script:
Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr)


Linux versions:
4.15.0-00003-g1bbe5edde691   vs   4.15.0-sunxi-dirty

In addition to that you are also booting into fb/hdmi.

If you use my branch (uImage and dtb) and replace the current boot.cmd
with this (to get the boot.scr you need to use mkimage) it should work:

setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
panic=10
load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000
boot/${fdtfile}
load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage
bootm 0x42000000 - 0x43000000