[PATCH 2/3] ARM: dts: sun8i: add audio codec support into V3s DTSI

? 2018?2?3? GMT+08:00 ??3:49:35, Maxime Ripard [off-list ref] ??:

On Fri, Feb 02, 2018 at 10:01:52PM +0800, Icenowy Zheng wrote:

quoted

Allwinner V3s SoC features an internal audio codec like the one in

H3,

quoted

and a analog codec like the one in H3/A23 (but much simpler).

Add them in the DTSI file.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi

b/arch/arm/boot/dts/sun8i-v3s.dtsi

quoted

index 20edebd983f0..f6c534efaef9 100644

--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -354,6 +354,25 @@
 			status = "disabled";
 		};
 
+		codec: codec at 01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog at 01c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;

This should be the whole size of the memory region.

OK. (Although on the datasheet digital part and analog
part is listed as one region.)

Maxime