[PATCH v3 2/7] ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple
From: Jagan Teki <hidden>
Date: 2018-02-04 17:55:15
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Switch to use ampire,am-800480aytzqw-00h LVDS timings from panel-simple instead hard coding the same in dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3, v2: - none arch/arm/boot/dts/imx6q-icore.dts | 31 +++++++++++++++++-------------- arch/arm/boot/dts/imx6qdl-icore.dtsi | 2 +- 2 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 5613dd9..c8e464e 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts@@ -48,6 +48,17 @@ / { model = "Engicam i.CoreM6 Quad/Dual Starter Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "ampire,am-800480aytzqw-00h"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &can1 {
@@ -71,22 +82,14 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; + reg = <0>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <30>; - hfront-porch = <30>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <64>; - vsync-len = <20>; + port at 4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; };
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index a1b469c..5fd9e00 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi@@ -49,7 +49,7 @@ reg = <0x10000000 0x80000000>; }; - backlight { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm3 0 100000>; brightness-levels = <0 4 8 16 32 64 128 255>;
--
2.7.4