[PATCH v5 2/6] dt-bindings: add bindings for Samsung micro-USB 11-pin connector
From: Andrzej Hajda <hidden>
Date: 2018-02-27 07:11:49
Also in:
dri-devel, linux-devicetree, linux-samsung-soc, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Samsung micro-USB 11-pin connector beside standard micro-USB pins, has pins dedicated to route MHL traffic. Signed-off-by: Andrzej Hajda <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- v4: - removed description of property inherited from usb-connector (Rob), - fixed example description. --- .../connector/samsung,usb-connector-11pin.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
new file mode 100644
index 000000000000..22256e295a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt@@ -0,0 +1,49 @@ +Samsung micro-USB 11-pin connector +================================== + +Samsung micro-USB 11-pin connector is an extension of micro-USB connector. +It is present in multiple Samsung mobile devices. +It has additional pins to route MHL traffic simultanously with USB. + +The bindings are superset of usb-connector bindings for micro-USB connector[1]. + +Required properties: +- compatible: must be: "samsung,usb-connector-11pin", "usb-b-connector", +- type: must be "micro". + +Required nodes: +- any data bus to the connector should be modeled using the OF graph bindings + specified in bindings/graph.txt, unless the bus is between parent node and + the connector. Since single connector can have multpile data buses every bus + has assigned OF graph port number as follows: + 0: High Speed (HS), + 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB. + +[1]: bindings/connector/usb-connector.txt + +Example +------- + +Micro-USB connector with HS lines routed via controller (MUIC) and MHL lines +connected to HDMI-MHL bridge (sii8620): + +muic-max77843 at 66 { + ... + usb_con: connector { + compatible = "samsung,usb-connector-11pin", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 3 { + reg = <3>; + usb_con_mhl: endpoint { + remote-endpoint = <&sii8620_mhl>; + }; + }; + }; + }; +};
--
2.16.2