2018-02-27 18:14 GMT+01:00 Mark Rutland [off-list ref]:

On Tue, Feb 27, 2018 at 03:09:26PM +0100, Benjamin Gaignard wrote:
 +

quoted

+static const u32 stm32mp1_ip_addr[] = {
+     0x5c008000,     /* 00 stgenc */
+     0x54000000,     /* 01 bkpsram */
+     0x5c003000,     /* 02 iwdg1 */
+     0x5c000000,     /* 03 usart1 */
+     0x5c001000,     /* 04 spi6 */
+     0x5c002000,     /* 05 i2c4 */

...

This duplicates information that is in the DT, which is unfortunate.

Yes I would have prefer to be able to get this information from etzpc
hardware itself
but that isn't the case so I need this table to found the status bits
of each device.

Why can these not be marked disabled inthe DT instead?

If it's dynamic form boot-to-boot, then the FW can probe this prior to
entering Linux, and patch the DT appropriately.

I know that is one software way to do, but let discusted about that in
cover letter thread.

Thanks,
Benjamin

Thanks,
Mark.