[PATCH v3 1/7] dt-bindings: mtd: document new nand-rb property
From: Miquel Raynal <hidden>
Date: 2018-01-09 10:36:31
Also in:
linux-devicetree
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2018-01-11 · Re: [PATCH v3 1/7] dt-bindings: mtd: document new nand-rb property · Rob Herring <hidden>
There are already an atmel,rb and an allwinner,rb properties, let's not make other ones and instead use a generic term: nand-rb to define NAND chips Ready/Busy lines. Signed-off-by: Miquel Raynal <redacted> --- Documentation/devicetree/bindings/mtd/nand.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 133f3813719c..8bb11d809429 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt@@ -43,6 +43,7 @@ Optional NAND chip properties: This is particularly useful when only the in-band area is used by the upper layers, and you want to make your NAND as reliable as possible. +- nand-rb: shall contain the native Ready/Busy ids. The ECC strength and ECC step size properties define the correction capability of a controller. Together, they say a controller can correct "{strength} bit
--
2.11.0