[linux-sunxi] [PATCH 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T
From: samuel@sholland.org (Samuel Holland)
Date: 2018-01-26 16:25:18
Also in:
linux-devicetree, linux-iio, lkml
On 01/26/18 09:19, Philipp Rossak wrote:
This patch adds the thermal zones to the A83T. Sensor 0 is located in the cpu cluster 0. Sensor 1 is located in cluster 1 and Sensor 3 is located in the gpu.
You mention sensor 3 here, but have sensor 2 in the device tree.
quoted hunk ↗ jump to hunk
Signed-off-by: Philipp Rossak <redacted> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 9e53ff5ac4ed..4259a8726031 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi@@ -747,4 +747,24 @@ #size-cells = <0>; }; }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&ths 0>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&ths 1>; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&ths 2>;
^^^^ here
+ }; + }; };
Thanks, Samuel