On Mon, Jan 15, 2018 at 6:33 PM, Quentin Schulz
[off-list ref] wrote:

The AXP813 PMIC is relatively close to the already supported AXP20X and
AXP22X. It provides three different power outputs: battery, AC and USB, and
measures a few different things: temperature, power supply status, current
current and voltage supplied, maximum current limit, battery capacity, min
and max voltage limits.

One of its two GPIOs can be used as an ADC.

There are a few differences with AXP20X/AXP22X PMICs though:
  - a different constant charge current formula,
  - battery temperature, GPIO0 and battery voltages are the only voltages
  measurable,
  - all data are stored on 12 bits (AXP20X/AXP22X had one type of data that
  was stored on 13 bits),
  - different scales and offsets,
  - a different ADC rate formula and register,

This patch series adds support for the PMIC's ADC and battery power supply
in the existing drivers.

Make the axp20x MFD automatically probe the ADC driver, add the battery
power supply node in axp81x node and enable it for the TBS A711 since it
has a soldered battery.

I suggest patches:
  - 4,5,8,14,15,16 go through Maxime and Chen-Yu's tree,
  - 1,2,3,7 go through Jonathan's tree,
  - 6,9,13 go through Lee's tree,
  - 10,11,12 go through Sebastian's tree,

I think I've reviewed or acked all the patches that haven't been merged.
The different drivers are bound together through the device tree, so the
various patches are safe to go through their respective trees, as Quentin
suggested.

Thanks!
ChenYu