[PATCH v2 0/3] ARM: mvebu: dts: updates to enable EDAC

Hi Chris,
 
 On jeu., janv. 11 2018, Chris Packham [off-list ref] wrote:

On 11/01/18 22:14, Gregory CLEMENT wrote:

quoted

Hi Chris,
  
  On jeu., janv. 11 2018, Chris Packham [off-list ref] wrote:

quoted

I've split this off from my earlier series[1] this is just the dts changes that
will enable support for the EDAC series when it lands.

The Armada 38x as well as the 98dx3236 and similar switch chips with integrated
CPUs use the same SDRAM controller block as the Armada XP. The key difference
is the width of the DDR interface.

[1] - https://marc.info/?l=linux-kernel&m=151545124505964&w=2

The series is looks good now. For patch 1 I still wait for that
the "marvell,,ecc-enable" property was accepted before merging it.

So I can either wait for that it was accepted before applying the series,
or just applying patch 2 and 3 for now, as you want.

I'm happy either way. If it's easier for you to keep the 3 patches 
together that's fine by me.

So I will apply all of them in the same time.


Thanks,

Gregory

quoted

Thanks,

Gregory

quoted

Changes in v2:
- update commit message
- add labels to dts

Chris Packham (3):
   ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg
   ARM: dts: armada-xp: add label to sdram-controller node
   ARM: dts: mvebu: add sdram controller node to Armada-38x

  arch/arm/boot/dts/armada-38x.dtsi             | 5 +++++
  arch/arm/boot/dts/armada-xp-98dx3236.dtsi     | 2 +-
  arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 5 +++++
  arch/arm/boot/dts/armada-xp.dtsi              | 2 +-
  4 files changed, 12 insertions(+), 2 deletions(-)

-- 
2.15.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com