[PATCH 4/6] dt-bindings: tegra: Add documentation for nvidia, tegra194-pmc
From: mperttunen@nvidia.com (Mikko Perttunen)
Date: 2018-01-08 04:56:23
Also in:
linux-devicetree, linux-tegra, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Tegra194 power management controller has one additional register aperture to be specified in the device tree node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 078a58b0302f..5a3bf7c5a7a0 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt@@ -3,6 +3,7 @@ NVIDIA Tegra Power Management Controller (PMC) Required properties: - compatible: Should contain one of the following: - "nvidia,tegra186-pmc": for Tegra186 + - "nvidia,tegra194-pmc": for Tegra194 - reg: Must contain an (offset, length) pair of the register set for each entry in reg-names. - reg-names: Must include the following entries:
@@ -10,6 +11,7 @@ Required properties: - "wake" - "aotag" - "scratch" + - "misc" (Only for Tegra194) Optional properties: - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
--
2.1.4