[PATCH] arm64: dts: ls208xa: add power monitor chip node
From: shawnguo@kernel.org (Shawn Guo)
Date: 2017-12-26 09:15:21
Also in:
linux-devicetree
On Mon, Dec 25, 2017 at 03:57:23PM +0800, Yuantian Tang wrote:
quoted hunk
Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature. Signed-off-by: Tang Yuantian <redacted> --- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 9a1d0d2..a75132c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi@@ -95,6 +95,17 @@ }; }; + i2c at 2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>;
We generally have a newline between property list and child node. I fixed it up and applied the patch. Shawn
+ ina220 at 40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
--
1.7.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel