[PATCH v6 01/11] dt-bindings: thermal: Describe Armada AP806 and CP110
From: Miquel Raynal <hidden>
Date: 2017-12-22 09:32:16
Also in:
linux-devicetree, linux-pm
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
Possibly related (same subject, not in this thread)
- 2017-12-22 · Re: [PATCH v6 01/11] dt-bindings: thermal: Describe Armada AP806 and CP110 · Miquel RAYNAL <hidden>
From: Baruch Siach <baruch@tkos.co.il> Add compatible strings for AP806 and CP110 that are part of the Armada 8k/7k line of SoCs. Add a note on the differences in the size of the control area in different bindings. This is an existing difference between the Armada 375 binding and the other boards already supported. The new AP806 and CP110 bindings are similar to the existing Armada 375 in this regard. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [[off-list ref]: reword, additional details] Signed-off-by: Miquel Raynal <redacted> --- .../devicetree/bindings/thermal/armada-thermal.txt | 37 +++++++++++++++------- 1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index 24aacf8948c5..e0d013a2e66d 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt@@ -2,22 +2,35 @@ Required properties: -- compatible: Should be set to one of the following: - marvell,armada370-thermal - marvell,armada375-thermal - marvell,armada380-thermal - marvell,armadaxp-thermal +- compatible: Should be set to one of the following: + * marvell,armada370-thermal + * marvell,armada375-thermal + * marvell,armada380-thermal + * marvell,armadaxp-thermal + * marvell,armada-ap806-thermal + * marvell,armada-cp110-thermal -- reg: Device's register space. - Two entries are expected, see the examples below. - The first one is required for the sensor register; - the second one is required for the control register - to be used for sensor initialization (a.k.a. calibration). +- reg: Device's register space. + Two entries are expected, see the examples below. The first one points + to the status register (4B). The second one points to the control + registers (8B). + Note: The compatibles marvell,armada370-thermal, + marvell,armada380-thermal, and marvell,armadaxp-thermal must point to + "control MSB/control 1", with size of 4 (deprecated binding), or point + to "control LSB/control 0" with size of 8 (current binding). All other + compatibles must point to "control LSB/control 0" with size of 8. -Example: +Examples: + /* Legacy bindings */ thermal at d0018300 { compatible = "marvell,armada370-thermal"; - reg = <0xd0018300 0x4 + reg = <0xd0018300 0x4 0xd0018304 0x4>; }; + + ap_thermal: thermal at 6f8084 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808C 0x4>, + <0x6f8084 0x8>; + };
--
2.11.0