[PATCH v4 3/4] cpufreq: Add DVFS support for Armada 37xx

On Sunday, December 17, 2017 7:08:53 PM CET Rafael J. Wysocki wrote:

On Thursday, December 14, 2017 4:36:31 PM CET Viresh Kumar wrote:

quoted

On 14-12-17, 16:00, Gregory CLEMENT wrote:

quoted

This patch adds DVFS support for the Armada 37xx SoCs

There are up to four CPU frequency loads for Armada 37xx controlled by
the hardware.

This driver associates the CPU load level to a frequency, then the
hardware will switch while selecting a load level.

The hardware also can associate a voltage for each level (AVS support)
but it is not yet supported

Tested-by: Andre Heider <redacted>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Gregory CLEMENT <redacted>
---
 drivers/cpufreq/Kconfig.arm           |   7 +
 drivers/cpufreq/Makefile              |   1 +
 drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++++++++++++++++++++++++
 3 files changed, 249 insertions(+)
 create mode 100644 drivers/cpufreq/armada-37xx-cpufreq.c

Thanks for taking care of very minor review comments I had. All the
patches look good now to me :)

All applied, thanks!

Actually, all except for the [4/4] as you applied it earlier.

Thanks!